Majestic

Majestic Ruby Direct Vent Gas Insert

  • Gas
  • Insert

A direct vent gas insert in three sizes with touch ignition, a variable fan and heat inputs from 18,900 to 35,000 BTU per hour.

Available options

Sizes: 25", 30" and 35". Interior: standard, tavern brown brick, cottage red brick or black glass liner. Front: clean screen in black or new bronze, contemporary arch in black or new bronze, or inside fit screen in black. Natural gas listed; propane by special order.

Kaminos is our fireplace retail store under the same ownership. View current pricing and available options there. For installation enquiries, contact Brown Chimney; availability depends on your location.

About this model

Overview

The Ruby is Majestic's direct vent insert in three sizes — 25, 30 and 35 inches — so the appliance can be matched more closely to the fireplace it goes into. It is a sealed unit that vents through a lined route in the existing chimney.

Equipment includes the IntelliFire Touch ignition system with battery backup, an RC400 remote, seven ceramic fibre split logs, a GFK-160A variable fan, a decorative brick base and ceramic glass. Heat input runs from 18,900 to 27,000 BTU/hr on the 25 inch model up to 24,500 to 35,000 BTU/hr on the 35 inch. Interior and front finishes are chosen at the point of order.

Is this right for your home?

An existing fireplace where matching the appliance size to the opening matters.

Check before ordering

  • The opening, against the 25, 30 or 35 inch model.
  • Which interior and front finish you want, as they are ordered with the appliance.
  • The chimney, since the liner kit is matched to it.

Worth knowing

  • Listed for natural gas; propane is a special order.
  • Changing the fire bed media to crushed glass or natural stones takes two bags, per the manufacturer's note.

Specifications

Figures published by the manufacturer. Where a value applies to a specific model or configuration, it is noted in the row.

Majestic Ruby Direct Vent Gas Insert — specifications
TypeGas fireplace insert for an existing fireplace
VentingDirect vent; components configuration-specific
Sizes25", 30", 35"
FuelNatural gas; propane by special order
Heat input (25")18,900 to 27,000 BTU/hr
Heat input (30")22,890 to 32,700 BTU/hr
Heat input (35")24,500 to 35,000 BTU/hr
IgnitionIntelliFire Touch with battery backup
ControlsRC400 remote control
Included7 ceramic fibre split logs, GFK-160A variable fan, decorative brick base, ceramic glass, gas flex connector
Interior optionsStandard, tavern brown brick, cottage red brick, black glass liner

Installation

With three sizes, the measured opening decides the model, and the liner kit is matched to the chimney configuration. The front finish and surround complete the face once the appliance is set.

Brown Chimney can measure the opening, inspect the chimney and confirm what the installation would involve before anything is ordered.

Service availability depends on your location.

What to check before installation

What an assessment of this model would cover:

  • Measured opening against the 25, 30 or 35 inch model.
  • Chimney configuration and the liner kit required.
  • Gas supply and the front and surround that finish the face.

Product documentation

Product details and imagery on this page come from the Kaminos product page.

Frequently asked questions

Which size should I choose?

Measure the existing opening and compare it with the 25, 30 and 35 inch models. Heat input rises with size, from 18,900 to 27,000 BTU/hr up to 24,500 to 35,000 BTU/hr.

How does it differ from the Ruby Platinum?

The Platinum configuration adds an LED ember bed and an eight-log set with the RC450 remote, while the Ruby is listed with seven split logs and the RC400 remote and offers a 25 inch size.

Can the fire bed media be changed?

Yes. Crushed glass or natural stones can be used instead of the standard media, and the manufacturer specifies two bags for either.