Image 1 of 5
Real Fyre
Real Fyre Charred Frontier Oak Vent-Free Gas Logs
A vent-free ceramic log set with deeply charred centres, built for the G10 burner system and offered in three sizes with four control options.
Kaminos is our fireplace retail store under the same ownership. View current pricing and available options there. For installation enquiries, contact Brown Chimney; availability depends on your location.
About this model
Overview
Charred Frontier Oak is a vent-free gas log set: hand-painted ceramic logs modelled from real wood, with rugged bark texture and charred-through centres that give the fire visible depth. The logs are cast in refractory ceramic and reinforced with steel rods so they hold their shape at high temperature.
The set is designed for the G10 burner system and is listed for natural gas. Sizes are 18, 24 and 30 inches, and the control system is chosen at the point of order, from a manual pilot to remote-operated variants. Because it is vent-free, it is governed by local rules and by the room it serves rather than by a chimney.
Is this right for your home?
A fireplace where a vent-free set is permitted and the fire is wanted mainly for its appearance with supplemental heat.
Check before ordering
- Whether vent-free appliances are allowed at the property and suitable for the room.
- The firebox opening against the size you want, since 18, 24 and 30 inch sets need different clearances.
- The gas supply, as this set is listed for natural gas; confirm the exact burner configuration with the retailer before ordering.
Worth knowing
- The set is built around the G10 burner system; the logs are not a drop-in replacement for another burner.
- Control system is a configuration choice and affects what is supplied with the set.
Specifications
Figures published by the manufacturer. Where a value applies to a specific model or configuration, it is noted in the row.
Installation
A vent-free set is decided by what the room and the local rules allow, not by a chimney route. The firebox is measured against the size of the set, and the burner and control system are ordered together with the logs.
Brown Chimney can look at the fireplace and the gas supply and say what a specific configuration would involve.
Service availability depends on your location.
What to check before installation
What an assessment of this set would cover:
- Whether a vent-free set is permitted at the property and suitable for the room.
- Firebox dimensions against the size of set being considered.
- Gas supply and the burner and control configuration being ordered.
Product documentation
Product details and imagery on this page come from the Kaminos product page.
Frequently asked questions
What makes this set vent-free?
It is designed to burn without a flue, using the G10 vent-free burner system rather than venting through a chimney. That also means local rules and room size decide whether it can be used.
Which burner does it use?
The G10 system. The logs are shaped around that burner, so they are not a drop-in replacement for a vented G45 set.
What sizes are offered?
18, 24 and 30 inches. Measure the firebox before choosing, and step down a size if your opening is close to the minimum.