Chimney Liner & Relining in Troy

Sixty-year-old clay tile, and a lot of gas conversions

4.9 · 247 Troy reviews

CSIA & NFPA certified

Installed to code

1-year workmanship warranty

40 years sweeping chimneys
3,412 verified Google reviews
4.9 average rating
CSIA-certified crew
NFPA 211 compliant
Licensed in 6 states
100% background-checked technicians
Free estimates
40 years sweeping chimneys
3,412 verified Google reviews
4.9 average rating
CSIA-certified crew
NFPA 211 compliant
Licensed in 6 states
100% background-checked technicians
Free estimates
40 years sweeping chimneys
3,412 verified Google reviews
4.9 average rating
CSIA-certified crew
NFPA 211 compliant
Licensed in 6 states
100% background-checked technicians
Free estimates
40 years sweeping chimneys
3,412 verified Google reviews
4.9 average rating
CSIA-certified crew
NFPA 211 compliant
Licensed in 6 states
100% background-checked technicians
Free estimates
Number section icon
Pricing, before you commit

Want an estimate before booking?

Relining is quoted after the flue is evaluated — there is no honest way to price it from the driveway. Use our free Inspection Cost Calculator to see what that assessment costs, in less than 30 seconds. No email, no callback.

Open Cost Calculator

Open Cost Calculator

No email required · Instant estimate

Estimate preview

Live

chimney-liner-relining

Quoted after flue evaluation

Inspection (credited)

−$49

Typical job

Sized to your appliance

Final price quoted in writing before any work.

faq svg
The craft, done properly
CHIMNEY LINER & RELINING IN TROY, MI

The liner is the continuous surface inside your flue. It contains heat and combustion gases so they never reach the surrounding masonry and framing, gives the flue the correct diameter for the appliance so it drafts properly, and protects the brick from the acidic byproducts of combustion. A cracked, gapped, or missing liner means heat and gases are reaching material never meant to take them.

Troy homes were built to code with clay tile liners, so the question here is rarely whether one exists — it is what sixty years of heat cycling and Michigan settlement have done to it. The second driver is conversion: a great many Oakland County homes were switched from wood to gas through the eighties and nineties, and a flue sized for a wood firebox is oversized for a gas appliance. Material is a code requirement, not a preference — 316L stainless for anything wood-burning, aluminium acceptable for gas — installed per NFPA 211 with top plate, cap, connector, and thimble. A camera evaluation comes first; see what that costs on the inspection cost calculator.

stack icon
The Work

What relining does for a Troy chimney.

You cannot see a failed liner from the room, and that is exactly the problem. Clay tile cracks from heat cycling, from chimney fires, and from the settlement that six decades of Michigan frost produces. A cracked tile is a gap where combustion gases reach masonry and framing, and there is no symptom in the living room until there is one. A camera run is the only honest way to know.

Sizing matters as much as condition here. If your fireplace was converted from wood to gas at some point — common across Troy's subdivisions — the original flue is almost certainly wider than the gas appliance needs, and an oversized flue cools the gases enough to condense rather than draft. Relining is also what makes an appliance upgrade possible, which is why a correctly sized liner is part of every Troy fireplace installation we quote.

We reline chimneys throughout Oakland County and in Rochester Hills and West Bloomfield. See the local service list on the Troy page. The full method, materials, and standards behind the work are on our chimney liner service page.

document icon
When to book

When does a Troy chimney need relining?

Liner failure is invisible from inside the house, so most of these signals arrive through an inspection rather than through the fireplace. These are the situations that call for a camera evaluation.

01

You've had a chimney fire — heat almost always damages tile liners

02

A camera inspection found cracked, gapped, or missing flue tiles

03

The fireplace was converted from wood to gas at some point

04

You're installing an insert or a new appliance

05

The flue is visibly oversized for the appliance connected to it

06

Pieces of clay tile are appearing in the firebox

After a chimney fire or a fuel change, a Level 2 camera inspection is the standard — the flue interior has to be documented, not assumed. Book it through Troy chimney inspection and the finding drives the quote.

stack icon
What to expect

What happens during a relining?

Relining in Troy is quoted after the flue is evaluated. Most standard drop-in installations complete in a day; jobs involving clay tile removal or smoke chamber work take longer and are scoped during assessment.

01

Assessing the existing flue

The flue is assessed before anything is quoted. Where the interior needs to be seen rather than assumed, a camera inspection is offered as its own line — you'll know the cost before we run it.

02

Sizing & material selection

The liner is sized to your appliance and flue. Wood-burning systems get 316L stainless steel only; gas appliances can take aluminum. NFPA 211 sets that rule, not preference or price.

03

Old liner removal

Where a failed liner is already in place, it comes out first — top plate, cap, and full extraction — and the bare flue is re-inspected before anything new goes down.

04

New liner installation

The liner runs the full flue height with top plate, cap, appliance connector, and thimble, code-compliant per NFPA 211. On exterior chimneys and cold climates we'll offer an insulation wrap and price it separately.

05

Connection & documentation

The appliance connection is completed and the installation photographed for your report, with the 1-year workmanship warranty on all labor performed in writing.

"

A liner fails silently. There's no smell, no smoke, no sign in the room — right up until there is one. That's why we look before we guess.

Company Owner
cup icon
The Brown Chimney Standard · Troy

Built for Oakland County winters.

Freeze-thaw is the local enemy
Snow sits for weeks in a Troy winter, then thaws. That cycle is what cracks mortar and lifts flashing — and what our repairs are specified against.
Code-ready for Troy inspections
From established Somerset-area homes to newer subdivisions, our repairs pass local inspection.
1-year workmanship warranty
Every piece of structural labor we perform is covered for a full year — in writing, not in promises.
Price fixed before we start
Measured on site, quoted in writing, approved by you — then the work begins. Never the other way around.
Interactive · liner match

What liner does your flue actually need?

Liner material isn't a preference — NFPA 211 decides it based on what you burn. Tell us the appliance, what the flue looks like inside, and how tall the chimney is. We'll show what happens to combustion gases in a failed flue, which material is code-compliant for your system, and the published price lines that apply.

WALL FRAMING FRAMING APPLIANCE / FIREBOX
Combustion gases reaching masonry and framing through failed tile
Continuous liner — gases contained, full flue height
Flue height: 14 ftStatus: Gases reaching masonry & framing
14 ft
Stainless steel only

Stainless — the fuel change decides it

A fuel change resets the whole venting question: the flue has to be re-sized to the new appliance, and any system that will burn wood requires 316L stainless (LNR-001), no exceptions under NFPA 211. If the chimney is going the other way, wood to gas, the old liner comes out first and the new one is sized to the gas appliance rather than to the old firebox.

Code-required material316L stainlessLNR-001 · required for anything wood-burning, per NFPA 211.
ScopeRemove + relineFailed liner extracted and the bare flue re-inspected before anything new goes down.
Warranty1 yearWorkmanship warranty on all labor performed.
  • Level 2 camera inspectionFull flue interior, video record, written report. Credited toward repair work booked from the findings.$149
  • Existing liner removal$695 standard extraction; $1,895 where the liner is damaged, seized, or difficult.$695 – $1,895
  • Stainless steel liner installation$3,495 for a standard drop-in; up to $12,995 where clay tile removal, smoke chamber work, and crown rebuild are part of the job.$3,495 – $12,995
  • Building permit, where the municipality requires oneFlat rate. Application, filing, and inspection coordination.$1,195
  • Workmanship warranty1 year

After a chimney fire, the flue gets documented

Heat almost always damages tile liners, and the damage is rarely visible from the firebox. A Level 2 camera inspection ($149, credited toward booked work) records the full interior; where it indicates hidden damage, a Level 3 investigation ($599–$2,999) exposes the concealed area and re-seals it afterward.

Ranges are from our 2026 price book. Final scope is measured on site and quoted in writing before any work. Brown Chimney · 1-888-666-0002
stack icon
For transparency

What this visit doesn't cover.

The camera evaluation itself — priced as its own line, and credited where it leads to booked work

Insulation wrap for exterior chimneys — offered on Michigan exterior stacks and priced separately

Smoke chamber parging or crown rebuild, if the evaluation finds they're needed

stack icon
FAQs

Common questions about chimney liner & relining in Troy

1 icon

How do I know if my Troy chimney needs relining?

Only a camera evaluation of the flue interior can tell you — liner damage is invisible from the room. The common triggers here are a past wood-to-gas conversion, a chimney fire, an appliance upgrade, or clay tile that has simply reached the end of sixty Michigan winters.
Faq Number

My fireplace was converted to gas — does that matter?

It matters a great deal, and it is common across Troy. A flue sized for a wood-burning firebox is oversized for a gas appliance, which lets flue gases cool and condense instead of drafting. Relining to the correct diameter is what fixes it.
3 icon

What kind of liner does my chimney need?

It depends on the fuel, and it is not optional. Wood-burning appliances require 316L stainless steel; gas appliances can use aluminium. NFPA 211 sets that rule, and the liner is sized to your specific appliance rather than to a standard diameter.
4 icon

Does an exterior chimney need an insulated liner?

On Michigan exterior stacks it is worth pricing. A liner running up a cold outside wall lets flue gases cool enough to condense, which weakens draft and corrodes the liner. Brown Chimney offers an insulation wrap and prices it as its own line.
5 icon

How long does relining take in Troy?

A standard drop-in liner installation typically completes in a day. Jobs requiring clay tile removal, smoke chamber work, or a crown rebuild take longer and are scoped during the assessment — the timeline is confirmed in writing with your quote.
stack icon
A safer hearth — for 2026

Sized right, code-compliant, documented.

Every Brown Chimney liner in Troy is sized to your appliance, installed code-compliant per NFPA 211, and photographed for your report — with a 1-year workmanship warranty on all labor. Book the evaluation online or call 248-260-5979.