Chimney Cap Installation in Southlake
The $375 part that keeps wildlife and storms out
★
4.7 · 60 Southlake reviews
✓
CSIA & NFPA certified
✓
1-year workmanship warranty
✓
Licensed · $2M insured
●
40 years sweeping chimneys
●
3,412 verified Google reviews
●
4.9 average rating
●
CSIA-certified crew
●
NFPA 211 compliant
●
Licensed in 6 states
●
100% background-checked technicians
●
Free estimates
●
40 years sweeping chimneys
●
3,412 verified Google reviews
●
4.9 average rating
●
CSIA-certified crew
●
NFPA 211 compliant
●
Licensed in 6 states
●
100% background-checked technicians
●
Free estimates
●
40 years sweeping chimneys
●
3,412 verified Google reviews
●
4.9 average rating
●
CSIA-certified crew
●
NFPA 211 compliant
●
Licensed in 6 states
●
100% background-checked technicians
●
Free estimates
●
40 years sweeping chimneys
●
3,412 verified Google reviews
●
4.9 average rating
●
CSIA-certified crew
●
NFPA 211 compliant
●
Licensed in 6 states
●
100% background-checked technicians
●
Free estimates
Pricing, before you commit
Want an estimate before booking?
Use our free Cap Installation Cost Calculator to get an estimated price in less than 30 seconds — based on your flue type, chimney size, and roof access. No email, no callback, no surprise fees.
Estimate preview
Live
chimney-cap-installation
$195 – $2,500
Inspection (credited)
−$49
Typical job
$375 – $549
Final price quoted in writing before any work.
The craft, done properly
CHIMNEY CAP INSTALLATION IN SOUTHLAKE, TX
A cap is the cheapest insurance a Southlake chimney has. It keeps storm-driven rain out of the flue, blocks the birds, squirrels, and wasps that treat an uncapped Texas chimney as prime real estate through a long warm season, and its mesh works as a spark arrestor in the other direction. Standard single-flue caps are $375 fitted and sealed, up to $549 for hard roof access. A loose or lightly rusted cap is re-secured and re-seated for $195.
Large Southlake homes frequently run multiple flues off one stack, which takes a custom stainless cap built to exact dimensions — typically $1,500–$2,500+. Homes with factory-built systems have a chase cover instead, which is a different component entirely and priced by dimensions. The full craft is on our cap installation service page.
Custom stainless multi-flue cap, built to measure — Southlake, TX
The Work
What a cap does for a Southlake chimney.
An open flue in north Texas is an open invitation. A warm season that runs eight months means birds and squirrels nest year-round, and on a fireplace lit twelve nights a year nobody notices until smoke fills the room. Then there are the storms: an uncapped flue takes wind-driven rain straight down into the structure.
Installation is precise or pointless: measured to your flue tile, anchored and sealed so storm winds cannot lift it, meshed so animals cannot enter and sparks cannot exit. Galvanized is standard for single flues; multi-flue caps and chase covers are stainless only, because anything lighter fails fast under Texas sun. If the crown shows UV crazing while we are up there, it goes in your report with a quote for crown repair.
Our Dallas crew covers the southern metroplex, and together we handle the full Texas service area. See the local service list on the Southlake page.
When to book
What are the signs you need a new chimney cap in Southlake?
Cap failure is easy to spot once you know where to look — and in north DFW, wildlife and hail expose it fast.
01
No cap at all — an open flue to the sky
02
Rust streaks running down the chimney from the cap
03
Scratching, chirping, or nesting sounds from the flue
04
Debris, leaves, or nesting material in the firebox
05
Water in the firebox after a storm
06
The mesh is bent, torn, or the cap was dented by hail
Already dealing with a nest? Removal is quoted on-site first, then the cap goes on so it does not happen again. A $49 inspection confirms cap size and spots anything else the roof visit should cover.
"
Water doesn't break chimneys overnight. It takes years — which means catching it early is everything. That's the whole repair business in one sentence.
Company Owner
The Brown Chimney Standard · Southlake
Built for hail, heat, and shifting clay.
Tarrant County hail country
Hail dents flashing and chase covers without leaking that day — the failure shows up weeks later. We check after every major storm season.
Clay soil moves what sits on it
North Texas clay swells and shrinks with the seasons, and a heavy chimney on top of it moves too. We establish whether it has settled before rebuilding anything.
Workmanship guarantee in writing
Every structural repair is backed in writing, with the scope explained clearly before work begins.
Price fixed before we start
Measured on site, quoted in writing, approved by you — then the work begins. Never the other way around.
What to expect
What happens during a cap installation?
A standard Southlake cap installation is a single visit, typically under two hours — measured, fitted, sealed, and photographed before we leave the roof.
01
Flue measurement
The flue tile is measured exactly — cap fit is everything. Multi-flue chimneys are dimensioned for a custom stainless build; single flues match standard sizing.
.jpg)
02
Crown & top inspection
While we're up there, the crown and top courses get checked. Anything worth watching goes in your photo report — cap and crown protect the same surface.
03
Fitting & anchoring
The cap is seated, anchored, and sealed so wind can't lift it. Galvanized steel for standard single flues; stainless only for multi-flue — no exceptions.
04
Mesh & spark arrestor check
Wire mesh on every opening — tight enough to stop animals and embers, open enough to keep the draft unrestricted.
05
Photo proof & report
The finished installation is photographed from the roof and added to your report, with the 1-year workmanship warranty in writing.
For transparency
What this visit doesn't cover.
Animal or nest removal (quoted on-site before the cap goes on)
Crown repair — documented with photos if spotted, quoted separately
Chase cover replacement for factory-built chimneys (custom stainless, quoted by dimensions)
FAQS
Common questions about chimney cap installation in Southlake
How much does chimney cap installation cost in Southlake?
Standard single-flue caps are $375 installed, up to $549 for difficult roof access. Cap repair and re-seating is $195. Custom stainless multi-flue caps run $1,500–$2,500+ depending on dimensions.
Do Southlake chimneys really need caps?
Especially here. A long warm season means birds, squirrels, and wasps nest in uncapped flues year-round, and DFW storms drive rain straight into an open chimney. A $375 cap prevents repairs that start at several times that.
What's the difference between a cap and a chase cover?
A cap covers the flue opening on a masonry chimney. A chase cover is the metal lid over the whole top of a factory-built chimney enclosure — common in Southlake's newer construction. They fail differently and are priced differently.
Can hail damage a chimney cap?
Yes, and it is routinely missed. Hail dents mesh and lids without immediately leaking, so the damage is discovered later when water or wildlife gets in. Worth checking after any significant Tarrant County storm.
Do you install caps outside Southlake?
Yes. From this office we cover north DFW, and our Dallas crew handles the southern metroplex — together serving the full Texas service area.
Related Services
Often paired with chimney cap installation.
No items found.
A safer hearth — for 2026
Capped, sealed, photographed.
Every Brown Chimney cap in Southlake is measured to your flue, sealed against storm winds and wildlife, and backed by a workmanship guarantee — with photos in your report. Book online or call 936-666-0002.